During intensive new construction, repair and maintenance, Multi Board offers the ultimate protection for complete areas against all possible damage during construction. Easydek Multi Board is a very versatile protective product. Use Multi Board to cover frames, floors and walls, or create a temporary wall between different areas using the thick variant. Multi Board is perfect to protect unglazed frames against wind and weather. It is transparent, so the closed off areas will still get enough light from outside. Multi Board can also be used to cover ceilings, stairs & staircases, columns, galleries, guardrails and lifts. Easydek Multi Board is very easy to use. Lay or place Easydek Multi Board on or against the surface to provide protection. Ensure the surface to be protected is clean, dry and fully cured. Fix Easydek Multi Board with Easydek Multi Tape Removable. Cutting is no problem thanks to the lightweight material.

PROPERTIES

Multi Board offers safe protection thanks to the very strong material. Multi Board is resistant to water and moisture, and is shock-absorbent. The light material is easy to use, and it is reusable. Available in different thicknesses.

The post EASYDEK MultiBoard appeared first on Alpha Mare.

Easydek Sticky Mat is a self-adhesive entrance mat for the reduction of dust. The adhesive upper layer easily captures dust. The underside also has a self-adhesive layer to ensure the mat does not move and remains firmly in place.

APPLICATION

During new construction, repair and maintenance, Easydek Sticky Mat offers optimal protection against dust migration. Easydek Sticky Mat automatically removes dust under the shoes of those walking in and out of a construction site or production location. Easydek Sticky Mat is ideal for rolling stock such as mobile scaffolding, carts, dolleys, trolleys, forklifts or wheelchairs. Easydek Sticky Mat can be used in places where dust-free rooms are important. Think of clean rooms, laboratories, technical rooms, or completed rooms on a construction site.

PROPERTIES

Easydek Sticky Mat consists of sixty self-adhesive layers that are simple to remove after they have become contaminated. The layers are numbered and manufactured in such a way that the self-adhesive layer is facing up. The number shows how many sheets remain. The last mat is self-adhesive, which means the mats never shift. Easydek Sticky Mat is lightweight and easy to use.

The post Sticky Mat EASYDEK appeared first on Alpha Mare.

Frame Cover ECO has a unique fit. Ideal for temporary protection of window frames and door frames, stairs railings and balustrades. The foam profiles lock tightly into place without the need for glue, tape or staples. Frame Cover ECO can be removed quickly and reused.

APPLICATION

Frame Cover ECO offers optimal protection against damage caused by wheelbarrows and construction traffic during new construction, renovation and maintenance. Frame Cover ECO U-100 and Frame Cover ECO U-120 are available for the protection of door frames. Frame Cover ECO is also available in cardboard to protect vulnerable corners.

PROPERTIES

Easydek Frame Cover ECO is quick and easy to apply. The product is self-locking, meaning there is no requirement for tape, staples or glue to fix it into place. Despite the shock-absorbent properties, Frame Cover ECO is a lightweight product that is easy to remove and use again. Therefore, Frame Cover ECO offers the best protection for windows and handrails.

The post Frame Cover EASYDEK appeared first on Alpha Mare.

Easydek Floor Cover is a super strong, mildly adhesive protective film for the temporary protection of floors and stairs. The transparent LLDPE film has a specially-designed, water- based adhesive coating for optimum adhesion to hard surfaces.

APPLICATION

Easydek Floor Cover offers safe protection to hard floors such as laminate, linoleum, ceramic tiles or flagstones during new construction, renovation and maintenance work. Thanks to the very thick material, this product is particularly applicable for intensive work.

Covering laminate flooring, tiles or linoleum with Floor Cover is very simple. The protective film is rolled up in such a way that the adhesive layer is on the outside. Roll out the film by hand or foot until all the seams are overlapped. The floor has perfect protection in an instant.

PROPERTIES

Easydek Floor Cover is quick and easy to use. Thanks to the self-adhesive underlayer, it remains well adhered and no tape is required. The film is therefore safe to use for mobile scaffolds, carts and dolleys. The adhesive does adhere to the surface too strong, which means it is quick to remove. No adhesive residue is left behind on the floor. Easydek Floor Cover is available in a variety of thicknesses and adhesive strengths.

• Quick and easy to use
• Super strong material for intensive work
• Always remains adhered
• No tape required
• Does not leave adhesive residues

The post Floor Cover EASYDEK appeared first on Alpha Mare.

Easydek Applicator is device that has been specially developed for the quick and easy installation of Carpet and Floor Cover in large areas.

APPLICATION

Use the Applicator for installing Easydek Carpet Cover & Easydek Floor Cover project rolls. These project rolls are 500 metres long and ideal for protecting large floor surfaces during new construction, renovation and maintenance work. Using the applicator, covering 1,000 m2 per hour is no problem.

PROPERTIES

The Applicator is quick to (dis)assemble, and yet robust and solid.

• Quick (dis)assembly
• Time saving
• Convenience
• Robust and sturdy
• Easy to use

The post EASYDEK Applicator appeared first on Alpha Mare.

Multi Cover Air FR is a self-adhesive flame-retardant cover fleece for the temporary protection of floors and stairs. The cover fleece consists of two layers. The non-slip bottom layer is non-woven and provided with a special, moisture-insensitive adhesive layer. Thus, it always remains firmly attached to the floor. The top layer is flame-retardant and allows any residual vapors from the underlying floor to pass through. From above, this film is moisture-proof. Thanks to the non-slip top layer, dirt cannot penetrate. Multi Cover Air FR protects the floor in a quick and easy way. Easydek’s Flame-retardant products are easily recognizable by the orange color.

Application

During new construction, renovation and maintenance work Multi Cover Air FR offers safe protection for laminate, linoleum, tiles and wooden stairs. Thanks to the vapor permeable foil, Multi Cover Air FR is especially suitable for floors that still need to breathe slightly after installation, such as parquet, ceramics and cast floors.

Properties

The combination of non-woven cover fleece and foil makes Multi Cover Air FR a particularly pleasant material to use. It is easy and quick to process. The cover fleece is supplied in rolls with the non-slip carpet pad on the outside. This allows the floor to be covered quickly and easily.
Application of Multi Cover Air FR ensures safe flame-retardant protection of floor or stairs. Multi Cover Air FR is shock-absorbent and resistant to intensive loading. The moisture-proof top layer is breathable on one side, allowing a newly laid floor to evaporate properly without adversely affecting the curing process or the escape of vapors. The anti-slip bottom layer is self-adhesive and therefore always remains securely in place, preventing slips and trips. Multi Cover Air FR is reusable.

• Flame retardant (B1 certified)
• Easy processing
• Shock absorbing
• Light breathability (70gr/m2/24h)
• Anti-skid layer
• Moisture proof top layer
• Reusable

The post MultiCover Air FR appeared first on Alpha Mare.

Multi Cover Air FR is a self-adhesive flame-retardant cover fleece for the temporary protection of floors and stairs. The cover fleece consists of two layers. The non-slip bottom layer is non-woven and provided with a special, moisture-insensitive adhesive layer. Thus, it always remains firmly attached to the floor. The top layer is flame-retardant and allows any residual vapors from the underlying floor to pass through. From above, this film is moisture-proof. Thanks to the non-slip top layer, dirt cannot penetrate. Multi Cover Air FR protects the floor in a quick and easy way. Easydek’s Flame-retardant products are easily recognizable by the orange color.

Application

During new construction, renovation and maintenance work Multi Cover Air FR offers safe protection for laminate, linoleum, tiles and wooden stairs. Thanks to the vapor permeable foil, Multi Cover Air FR is especially suitable for floors that still need to breathe slightly after installation, such as parquet, ceramics and cast floors.

Properties

The combination of non-woven cover fleece and foil makes Multi Cover Air FR a particularly pleasant material to use. It is easy and quick to process. The cover fleece is supplied in rolls with the non-slip carpet pad on the outside. This allows the floor to be covered quickly and easily.
Application of Multi Cover Air FR ensures safe flame-retardant protection of floor or stairs. Multi Cover Air FR is shock-absorbent and resistant to intensive loading. The moisture-proof top layer is breathable on one side, allowing a newly laid floor to evaporate properly without adversely affecting the curing process or the escape of vapors. The anti-slip bottom layer is self-adhesive and therefore always remains securely in place, preventing slips and trips. Multi Cover Air FR is reusable.

• Flame retardant (B1 certified)
• Easy processing
• Shock absorbing
• Light breathability (70gr/m2/24h)
• Anti-skid layer
• Moisture proof top layer
• Reusable

The post Multi Cover Air Plus appeared first on Alpha Mare.